Skip Navigation Links | English (United States) | Water and Wastewater | 2105 LTE Network Module

2105 LTE Network Interface Module

2105net.jpg
2105net.jpg

A powerful solution for flow and parameter data interchange needs

The 2105 Interface Module is a powerful solution for environmental monitoring professionals to interface different monitoring and recording instruments. 

The 2105 will monitor the recorded data and take intelligent actions, such as sampler enabling, pacing, and/or alarm generation, based on user-specified conditions. 

Its unique flexibility allows connection to several devices at the same time. 2100 Series Flow Modules, 6712 Samplers, and Teledyne ISCO Rain Gauges​ are directly compatible. It can also be used with non-Teledyne ISCO instruments that have SDI-12 or Modbus output. Additional input options (4-20 mA, etc.) are possible using readily-available aftermarket converters. 

An optional built-in cell phone modem allows remote access to data that has been stored within the 2105, and can fed to a central server via the Internet. 

Teledyne ISCO’s modular design allows the 2105 to be stacked with other 2100 Series flow​, communication, interface, or display modules.

Datasheet User Manual Warranty Information​​​Request a Quote

​Standard Features

  • Rugged, submersible enclosure meets NEMA 4X, 6P and IP68 requirements.
  • May be stacked together with up to three other Teledyne ISCO 2100 Modules
  • A variety of factory-available cables allows literally dozens of multiple instrument configuration possibilities.
  • Variable rate data storage lets you change the data storage interval when programmed conditions occur. This feature assures maximum information about an exceptional event - such as an overflow - while conserving power and data capacity during normal conditions.
  • Secure data storage. All data are continuously stored in flash memory to protect against loss in case of power failure
  • Records and stores input voltage and temperature data.
  • 38,400 bps serial port communication provides speedy setup and data retrieval.

Applications

  • Capacity assessments
  • I&I, CMOM, SSO and other collection system monitoring
  • Permit compliance and enforcement
  • Stormwater runoff monitoring
  • Non-point source monitoring
  • River and stream gauging

Options and Accessories

Potential variations for interfacing different hardware and software to make up the comprehensive data system you desire are virtually unlimited with the 2105. Input/output choices are shown in the diagram above - and may be enhanced by using available aftermarket converters.


​

Specifications

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​2105 Network Interface Module

Size (HxWxD): 2.9 x 11.3 x 7.5 in. (7.4 x 28.7 x 19.1 cm)
Weight: 2.0 lbs. (0.9 kg)
Material: High-impact polystyrene, stainless steel
Enclosure: NEMA 4X, 6P IP68
Operating temperature: -4 to 140 °F (-20 to 60 °C)
Storage temperature: -40 to 140 °F (-40 to 60 °C)
Power Required: 12 VDC nominal (7.0 to 26 VDC), 100 mA typical, 1 mA standby, 2 A maximum.
Power Source: Typically a Teledyne Isco 2191 Battery Module, containing 2 alkaline or 2 rechargeable lead-acid batteries. (Other power options are available; ask for details.)
Typical battery life: Using 15-minute data storage interval— Energizer® Model 529 alkaline, 15 months; Teledyne Isco rechargeable lead-acid, 2.5 months
Program Memory: Non-volatile, programmable flash; can be updated using PC without opening enclosure; retains user program after updating

Data Handling and Communications

Data Storage: Non-volatile flash; Retains stored data during program updates; Capacity 798,000 bytes (up to 158,000 readings, equal to over 270 days of rainfall, temperature, conductivity, and pH readings at 15-minute intervals, plus input voltage readings stored at 12-hour intervals)
Data Types: Flow Rate, Level, Rainfall, Conductivity, Dissolved Oxygen, Temperature, pH, Percent, Velocity, Volume, Total Dissolved Solids, Salinity, Phosphate, Ammonia, Nitrate, TOC, COD, Total Suspended Solids, Sludge Index, Sludge Volume, SAC, Turbidity, Load, Input Voltage, Wireless Signal, Rainfall Intensity, Specific Conductance, Chloride, Chlorophyll, O.R.P., Ammonium
Storage Mode: Rollover; 5 bytes per reading
Storage Interval: 15 or 30 seconds; 1, 2, 5, 15, or 30 minutes; or 1, 2, 4, 12, or 24 hours. Storage rate variable based on level, velocity, flow rate, total flow, or input voltage
Data Retrieval: Serial connection to PC or optional 2101 Field Wizard module; optional modules for spread spectrum radio; land-line or cellular modem. Modbus and 4-20 mA analog available.
Software: Teledyne Isco Flowlink for setup, data retrieval, editing, analysis, and reporting
Multi-module networking: Up to four 2100 Series modules, stacked and/or remotely connected. Maximum distance between modules is 3,300 feet (1000 m)
Serial Port Communication Speed: Up to 38,400 bps

2191 Battery Module

Size (H x W x D): 6.0 x 9.6 x 7.6 in. (152 x 244 x 193 mm)
Weight (w/o batteries): 3.2 lbs. (1.4 kg)
Materials of construction: High-impact polystyrene, stainless steel
Enclosure: NEMA 4X, 6P (IP68)
Batteries: Two 6-volt Energizer Model 529* alkaline (26 Ah capacity) or Teledyne Isco Rechargeable Lead-acid (5 Ah capacity) recommended. *Note - Energizer 529 ER and EN529 do not give specified life.

​For a full list of product specifications, see the datasheet.

​​​​​Datasheet​​ ​

When you purchase instruments from Teledyne ISCO, you not only receive innovative, high quality products, you also receive excellent customer service and product support. Your initial purchase is only the beginning of Teledyne ISCO's ongoing commitment to their customers.